MIL-DTL-5421D
1.3 Part or identifying number (PIN). The PIN to be used for pitot tubes acquired to this
specification is created as follows:
AX XXXX - X
`
1 = Type 1 - 24-volt, direct current
2 = Type 2 - 115-volt, 400-Hz, single-phase, alternating current
Specification number (Style): 5811 - "L" shaped, inverted
5812 - "L" shaped
5813 - Straight
AN or AS prefix
2. APPLICABLE DOCUMENTS
2.1 General. The documents listed in this section are specified in sections 3 and 4 of this
specification. This section does not include documents cited in other sections of this specification
or recommended for additional information or as examples. While every effort has been made to
ensure the completeness of this list, document users are cautioned that they must meet all specified
requirements of the documents cited in sections 3 and 4 of this specification, whether or not they
are listed.
2.2 Government documents.
2.2.1 Specifications, standards, and handbooks. The following specifications, standards,
and handbooks form a part of this document to the extent specified herein. Unless otherwise
specified, the issues of these documents are those cited in the solicitation or contract (see 6.2).
DEPARTMENT OF DEFENSE SPECIFICATIONS
MIL-S-7742
- Screw Threads, Standard, Optimum Selected Series:
General Specification for.
MIL-A-8625
- Anodic Coatings for Aluminum and Aluminum
Alloys.
AN3115
- Receptacle - Airspeed Tube Electrical.
AN5811
- Tube, Pitot, Electrically Heated, "L" Shaped, Inverted.
AN5812
- Tube, Pitot, Electrically Heated, "L" Shaped.
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business