MIL-PRF-83174E
ASTM INTERNATIONAL
ASTM-B117
-
Salt Spray (Fog) Apparatus, Operating
(DoD adopted)
(ASTM documents may be obtained online at www.astm.org or addressed to the American
Society for Testing and Material, 100 Barr Harbor Drive, West Conshohocken, PA 19428-2959.)
2.4 Order of precedence. Unless otherwise noted herein or in the contract, in the event of a
conflict between the text of this document and the references cited herein, the text of this
document takes precedence. Nothing in this document, however, supersedes applicable laws and
regulations unless a specific exemption has been obtained.
3. REQUIREMENTS
3.1 First article. When specified (see 6.2), a sample shall be subjected to first article inspection
in accordance with 4.2.
3.2 Recycled, recovered, or environmentally preferable materials. Recycled, recovered, or
environmentally preferable materials should be used to the maximum extent possible, provided
that the material meets or exceeds the operational and maintenance requirements, and promotes
economically advantageous life cycle costs.
3.3 Materials. Unless otherwise specified, nonmagnetic and nonferrous materials shall be used.
Materials shall not produce deleterious fumes and shall be suitably treated to resist corrosion due
to electrolytic decomposition, fungus, salt spray, and any other conditions that may be
encountered during operation, use, or storage. Nonferrous materials contained within
hermetically sealed enclosures shall be considered suitably protected from corrosion.
3.4 Interface.
3.4.1 Dimensions. The transmitter shall conform to the dimensions in Figure 1.
3.4.2 Visual. The transmitter shall possess an aligning device to prevent misorientation or
misalignment of the transmitter during installation (see Figure 1).
3.4.3 Connectors. The electrical connector for the TRU-106/A shall conform to part number
MS3113H12C10P. A connector conforming to part number MS3113H12C10PX (for new
design, use MS3474 connector type) shall be used on the TRU-107/A. The transmitter
connections shall be in accordance with Table I.
3
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business